The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: pigjes on January 29, 2019, 03:51:41 pm

Title: B&k 467 blows f1 fuse
Post by: pigjes on January 29, 2019, 03:51:41 pm
Hi,

Recently bought a 467 rejuvenator on ebay, supposed to be working.
Arrived with a blown fuse F1. Resoldered all joints, new fuse.

Turning to setup, power goes on (g1+line volts also show on the meters) for 5 seconds and blows fuse again.
Heater voltage is still working and adjustable, but power light is now off and no g1 or line voltage anymore.

Who has some tips on what to check or measure first, since I am not that good in reading schematics.

Thanks!
Title: Re: B&k 467 blows f1 fuse
Post by: Ken Layton on October 16, 2020, 11:20:00 am
A bit late, but the 467 manuals and repair logs are now located here:

https://sites.google.com/site/mtpacifico/mikes_arcade/kens_korner