Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Red_aa on January 27, 2010, 07:21:37 pm

Title: Looking for help with my Gauntlet Dark Legacy
Post by: Red_aa on January 27, 2010, 07:21:37 pm

Hi everyone,
   I'm a newbie here and to the arcade world.  So here's what I did I moved my Dark legacy game to the other side of my basement.   On the way I hit one of the dogs toys and it slammed down on the floor(on the bottom not the back).  When I powered it back up it had no picture.  I checked all the plugs and the fuse on the monitor board (WG k7500).   I also checked the voltage out of the power supply. They were all good.  I installed a Gauntlet Dark Legacy v.2.52 Upgrade Kit  which included the security chip, boot eprom, and Harddrive.  It will not dark play and makes no sound.   All the boards light up.  Can anyone give me an idea of what I broke or where to look at next.

Title: Re: Looking for help with my Gauntlet Dark Legacy
Post by: Red_aa on January 31, 2010, 03:32:30 am

bump

Title: Re: Looking for help with my Gauntlet Dark Legacy
Post by: DashRendar on January 31, 2010, 11:35:42 am

Sounds like maybe the JAMMA harness came disconnected?