Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: speedklz on January 23, 2010, 07:24:22 pm

Title: Monitor short at top
Post by: speedklz on January 23, 2010, 07:24:22 pm

What is causing this. Notice the top dont show all of it its like 2 to 4 lines or more cut off.

Title: Re: Monitor short at top
Post by: grantspain on January 23, 2010, 08:11:04 pm

looks like horizontal hold and size issue

Title: Re: Monitor short at top
Post by: speedklz on January 23, 2010, 08:23:32 pm

I have tried every setting it just crops the top off.

Title: Re: Monitor short at top
Post by: grantspain on January 23, 2010, 08:37:01 pm

what monitor is it?

Title: Re: Monitor short at top
Post by: Kevin Mullins on January 23, 2010, 10:19:19 pm

I believe there is a pot on the boardset itself also to adjust.

Title: Re: Monitor short at top
Post by: speedklz on January 24, 2010, 11:04:53 am

it is a WG 7000 I did try the 50/60 hz pot but that caused it to roll over at the top.

Title: Re: Monitor short at top
Post by: grantspain on January 24, 2010, 11:21:09 am

try a width jumper if your chassis has it

Title: Re: Monitor short at top
Post by: speedklz on January 24, 2010, 09:11:07 pm

There is a jumper for left, right center adjust but not for this as I can see. I think mabey the board needs some tlc.