Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: KingPaul on January 22, 2010, 10:45:07 pm

Title: Shuffle Bowling
Post by: KingPaul on January 22, 2010, 10:45:07 pm

I just purchased a 1967 Chicago Coin Riviera Shuffle Bowl game and was wondering how it should be leveled.  Should it be completely level or should it be a little higher towards the back (Pins side) so the puck would travel back towards the shooter?

KingPaul

Title: Re: Shuffle Bowling
Post by: SirPeale on January 23, 2010, 09:28:12 am

I /think/ it's supposed to be perfectly level.  The return comes when it bounces off the far wall.  At least that's how I've always seen it done.

Title: Re: Shuffle Bowling
Post by: Ken Layton on January 23, 2010, 11:27:18 am

Should be level. There's a rebound rubber in the back the puck hits to bounce the puck back. The rebound rubber is still available at most coin-op parts distributors.

http://www.happcontrols.com/amusement/gameparts/shuffle.htm (http://www.happcontrols.com/amusement/gameparts/shuffle.htm)