Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: MLew on January 18, 2010, 10:08:57 am

Title: no power- Hantarex Polo 25 in
Post by: MLew on January 18, 2010, 10:08:57 am

I just swapped out monitors and now have a 25 in Hantarex Polo in my cab. I didn't have a matching connector to the mains input, so I just inserted the exposed wires into the input connector on the chassis for a quick fix :)

Well, while adjusting the monitor controls, the wires slipped out and touched eachother (there is 2 of em).

There was a small spark and now there is no power....to the entire cabinet 

The monitor, jamma, speakers, nothing. I don't know where to start looking for what's wrong.



P.S. I posted this problem in the main forum, but thought I'd ask this side of town as well. If I'm in the wrong, it shall be deleted. Thanks!

Title: Re: no power- Hantarex Polo 25 in
Post by: grantspain on January 18, 2010, 01:08:49 pm

check fuses

Title: Re: no power- Hantarex Polo 25 in
Post by: southmonitor on January 24, 2010, 10:00:24 pm

Check main Power Supply. Use a multimeter and check if you have AC power coming to the Power Supply and if it is delivering DC at the outputs.