Build Your Own Arcade Controls Forum
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Irish2010 on December 21, 2009, 06:28:40 pm
-
I have an Indy 500 twin arcade and on one of the screens I can't see the background during play. All I see is a blue screen with the controls(speed, time left to play). Anyone have any idea what is causing this?
-
video board on the model 2 stack,common problem-most likely to be a bad solder
-
Thanks for the info. I will check that out when i get home.
-
the problemis with the large surface mount ic's and rams,not something you can fix with a standard soldering iron-you will need suface mount technology
try reseating the pcb stack first
-
I opened each game up and noticed that the game not working has a blicking red light on the board. The other car that is working has a green light. Is ther any way to know the error based on the lights. It liooks like it is a block of 6 lights.
-
I can't remember what that ponits too,I am pretty sure its either a low +5 or an ic error
try contacting http://www.andygeezerservices.co.uk/ (http://www.andygeezerservices.co.uk/)
if anyone knows the fault this fella will
i am sure this is a video board problem though-very similar to what you see on daytona
-
Thanks Grant.