Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: emdkay on December 21, 2009, 01:59:30 pm
-
Can anybody suggest a very small, functional coin door? The smallest that Happ offers appears to be 10.95" tall x 8.04" wide
http://www.happcontrols.com/coindoors/40005500_exploded.htm (http://www.happcontrols.com/coindoors/40005500_exploded.htm)
I'm looking for no more than 8" tall and 14" wide. Are there perhaps horizontal mounted coin doors?
???
-
Would either of these help you? I know it's 8.5", so probably too big on the X axis.
http://www.ultimarc.com/JShopServer/section.php?xSec=9 (http://www.ultimarc.com/JShopServer/section.php?xSec=9)
-
Let's review....
I'm looking for no more than 8" tall and 14" wide. Are there perhaps horizontal mounted coin doors?
http://www.ultimarc.com/JShopServer/section.php?xSec=9 (http://www.ultimarc.com/JShopServer/section.php?xSec=9)
Aperture 8.5 in wide X 7.5 in high.
;)
-
The problem is that high and tall are 2 different measurements. Obviously the door won't work. :laugh2:
-
Actually, he said them backwards (I know what you're saying bkenobi), so the one I listed would work.
-
8" tall and 14" wide is ideally the maximum coin area I have to work with - those are listed in the proper order (hoping for a horizontal door), but the one you listed should work. Thanks Kirk :cheers:
-
No prob.
-
Yeah, just givin' Ginsu a hard time.
Do keep in mind the coin mech itself seems to be sold separately.