Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: gonzojoey on December 03, 2009, 10:14:02 am

Title: SOLD - Dynamo cab w/ 2 cut corner CP's (one has SF layout) - Simpsonville, SC
Post by: gonzojoey on December 03, 2009, 10:14:02 am

I have a Dynamo cab that has the Jamma harness (and other misc wires) still in it, but no monitor or Marquee. It was a Rough Rangers, so it has the Bezel glass and CP like in the pic on Klov (http://klov.com/game_detail.php?game_id=9370 (http://klov.com/game_detail.php?game_id=9370)). Control Panel is missing one joystick, but the rest is fully populated.
Included w/ this cabinet is another cut corner Control Panel in the Street Fighter style (3 button over / 3 button under). This CP is also populated, but missing 2 or 3 buttons (used them on other projects).I was going to use this CP to make this a SFII cabinet, but never got that far into the project.

So, you get a Black Dynamo cab (24in wide, i think) with full Rough Ranger Art, Bezel, CP  ...AND another CP with Street Fighter style layout.

Unless you want to pay to ship the cabinet, I would suggest this be local pickup only.
Asking $60 for the whole group (obo)

Thanks!

**Cabinet is being Parted out now. See below for what's left**

Title: Re: FS - Dynamo cab w/ 2 cut corner CP's (one has SF layout) - Simpsonville, SC
Post by: mrclean on December 04, 2009, 12:42:23 am

sending pm..

Title: Re: FS - Dynamo cab w/ 2 cut corner CP's (one has SF layout) - Simpsonville, SC
Post by: gonzojoey on December 05, 2009, 12:18:29 am

Sorry for the bad pics, this cabinet is buried in my storage shed and I need the room / money.
I'll wait until Monday before I start parting it out. Already had a few inquiries on the CP's. IF you already sent me a PM, then you're 1st on the parts list :)

(I guess I took more off the SF style CP than I thought...)

Title: Re: FS - Dynamo cab w/ 2 cut corner CP's (one has SF layout) - Simpsonville, SC
Post by: uolarethian on December 07, 2009, 03:47:15 pm

I might be interested in just the extra control panel. I am in bad need of one and it just might fit the bill. Would you consider selling it and shipping it to me. If so please measure the length of the cp and what you would want for it please. Thanks for your time.

Title: Re: FS - Dynamo cab w/ 2 cut corner CP's (one has SF layout) - Simpsonville, SC
Post by: gonzojoey on December 07, 2009, 05:03:46 pm

Well, it's Monday and no one wanted the whole cab combo deal...so it's time to part it out. I'm gonna strip a few buttons for my future projects (and the other joystick from the Rough Ranger panel), but the rest is up for grabs

SF Style Control Panel $20 + shipping:
Sold to Mr Clean...(also including Marquee bracket)

Rough Ranger Control Panel $15 + shipping
Sold to Ninten-doh

Rough Ranger Bezel $10 + shipping

Coin Doors (including mechs, etc) $10 + shipping

Other Misc parts  FREE + shipping

Title: Re: FS - Dynamo cab w/ 2 cut corner CP's (one has SF layout) - Simpsonville, SC
Post by: 2600 on December 07, 2009, 05:15:12 pm

Don't suppose you were passing through the DC area?

Title: Re: FS - Dynamo cab w/ 2 cut corner CP's (one has SF layout) - Simpsonville, SC
Post by: mrclean on December 07, 2009, 05:52:47 pm

i'll take the control panel ..pm sent for paypal addy

Title: Re: FS - Dynamo cab w/ 2 cut corner CP's (one has SF layout) - Simpsonville, SC
Post by: gonzojoey on December 11, 2009, 04:12:02 pm

Cabinet Sold - Thanks