Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: s34n on November 27, 2009, 12:11:21 pm
-
Hi There,
I turned my cab on this morning, and the monitor doesn't receive any power.... i can hear a slight clicking sound from the board attached to the tube, i've had a few problems with this one anyway (problems (http://forum.arcadecontrols.com/index.php?topic=97440.msg1028080#msg1028080)), so I think its time to get rid!!
The cabinet takes a 29" screen, but I believe this one is 28"... my friend recently installed a tri-sync one into his, and the quality looks amazing...
Can anybody recommend a suitable replacement? I hear the kortek ones are good.... im in europe (uk), so whoever will deliver to there...
useless info... i use 640x480 interlaced @ 15khz (i dont know if this helps, im a software guy- not hardware, so its all a bit alien to me)
Sean
-
difficult to find a tri sync that gives perfect geometry at 15khz,in europe the only one i know that is available is the sanwa pfx otherwise you can find wei ya or rodotron
sega had a few sanwa pfx left last week and i am told more are coming in,giz10p.co.uk have rodotron monitors in stock
-
thanks for that link, ill consider at as an option.
would you recommend any of these??
http://cgi.ebay.co.uk/SANWA-29in-15-25-khz-MONITOR-USED-WORKING_W0QQitemZ120422011698QQcmdZViewItemQQptZUK_Video_Games_Coin_Operated_MJ?hash=item1c09b61332#ht_2891wt_953 (http://cgi.ebay.co.uk/SANWA-29in-15-25-khz-MONITOR-USED-WORKING_W0QQitemZ120422011698QQcmdZViewItemQQptZUK_Video_Games_Coin_Operated_MJ?hash=item1c09b61332#ht_2891wt_953)
http://cgi.ebay.co.uk/NANAO-29in-MONITORS-used-working_W0QQitemZ120400316379QQcmdZViewItemQQptZUK_Video_Games_Coin_Operated_MJ?hash=item1c086b07db#ht_2929wt_975 (http://cgi.ebay.co.uk/NANAO-29in-MONITORS-used-working_W0QQitemZ120400316379QQcmdZViewItemQQptZUK_Video_Games_Coin_Operated_MJ?hash=item1c086b07db#ht_2929wt_975)
http://cgi.ebay.co.uk/Sega-MS9-29-Monitor_W0QQitemZ170333560739QQcmdZViewItemQQptZUK_Video_Games_Coin_Operated_MJ?hash=item27a8abdfa3#ht_1356wt_814 (http://cgi.ebay.co.uk/Sega-MS9-29-Monitor_W0QQitemZ170333560739QQcmdZViewItemQQptZUK_Video_Games_Coin_Operated_MJ?hash=item27a8abdfa3#ht_1356wt_814)
-
the nanao ms9-29 give an amazing quality pic,they are only dual sync though(15/24khz)
-
if i'm only using it for 15khz, that wouldn't be a problem would it??
the one i already have is 15/25khz right?
http://www.andysarcade.de/data/coinop/videogames/raster%20monitors/hantarex/polostar/service_manual_hantarex_polostar.pdf (http://www.andysarcade.de/data/coinop/videogames/raster%20monitors/hantarex/polostar/service_manual_hantarex_polostar.pdf) manual
-
normally the polostar are tri sync although i have seen 31khz star chassis,polo 2 are auto sync dual
the nanao will look very good with 15khz-just make sure you get one with no screen burn and insist on the seller powering it up with a grid test pattern and showing you the photos