Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: TheGameAh on July 20, 2003, 10:26:38 am

Title: Coin Door Dimensions
Post by: TheGameAh on July 20, 2003, 10:26:38 am

Last question about coin doors from me, I promise.  I was just looking for some numbers on the coin doors you all use.  I have an old Stern cabinet, and I have a hunch that the hole they used for their coin door is not the same for the coin doors floating around today.  The dimensions of the coin door hole left in my cab are 12.5" by 12.5".  Are these the door dimensions from Happs coin doors being sold today?

Title: Re:Coin Door Dimensions
Post by: Ghoward on July 20, 2003, 10:32:45 am

Hi,

I'm not sure however Happs website has all the cutout dimensions for all their coin doors. I used them myself to cut the hole for my door while the door was still on its way from Happs. I'm glad to say once the door got to me it did fit in the hole i cut.

Gary

Title: Re:Coin Door Dimensions
Post by: SirPeale on July 20, 2003, 11:03:01 am

I'm not familiar with Stern cabinets, so I'm not sure which door goes in there, per se.  But, with the dimensions you gave, the door might look like this:

(http://www.pealefamily.net/tech/mame/coindoor.jpg)

Hey!  You can specify image size within the IMG tag!  Awesome!