Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Tenn_pin on November 21, 2009, 09:50:48 pm

Title: ***Fixed***Electrohome G05-801 precap advice
Post by: Tenn_pin on November 21, 2009, 09:50:48 pm

I have a G05 with no glow and DOA.  The fuse F100 was blown.  I replaced the fuse and still no glow, but the fuse did not blow this time.  What part(s) should I be looking at?  This is the first 05 I have tried to repair, and I would like to do a shot gun repair of all usually bad parts.  Is there a flow chart available?

Thanks,
R

 ??? :applaud: :applaud: :applaud:

Title: Re: Electrohome G05-801 precap advice
Post by: Tenn_pin on November 27, 2009, 08:04:12 pm

Well gang, it turned out to be a cold solder joint on R104 (leg going to P100-3). I reflowed the solder joint and still had not connection. So I got a piece of wire and jumpered the two connections and now it works.

R