Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: shardian on November 15, 2009, 09:22:18 pm

Title: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: shardian on November 15, 2009, 09:22:18 pm
Let me know what all you want, and I'll cut you a deal.

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=98111.0;attach=136444;image)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=98111.0;attach=136446;image)


1. ½” Black T-Molding – 13.5 feet
2. shielded wiring - 6 pairs (12 wires) solid core. Somewhere between 50 and 100 feet.
3. Super Pacman manual
4. power cable. 3 pin keyed molex ends
5. VGA monitor adaptor. Used to hook up arcade monitor to PC or ArcadeVGA
6. Atari over/under coin bucket
7. Badlands (racing game) jamma board. Not working
8. Electrohome G07 chassis. Vertical collapse, busted Width coil ( can include new width coil.)
9. Ms. Pacman cocktail control panel housing
10. Silver Strike Bowling Overlay NOS
11. Parts Express black vinyl – will cut to what you need if you only want a small piece
12. mini fluorescent fixure – runs on 12 volts. Would workgreat as small marquee light
13. Isolation Transformer
14. IDE connector
15. Coin insert Bezel
16. Atari Sys. II speaker
17. Power Cords (2)
18. Slam Switch
19. Control Panel clamps (no strike plates)
20. $85 Dock n Talk – It lets you tie your cell phone into your land line house wiring and use the cell signal on normal phones…or you can hook a single dedicated phone to it. $85 is the average price on ebay. I paid $165 for it.
21. PS/2 mouse guts to make a trackball/spinner interface
22. cool arcade operator collection forms pad See detail picture below
23. Power Cord with 90 degree plug
24. Betson trackball – rebuilt with all new parts
25. upper vent for 720
26. lower MARQUEE bracket for Champ Sprint/paperboy
27. Orange T-molding - 15'-11" actual length
28. Gray T-molding 2 pieces approx 2’ each
29. Power brick from an Atari System II (I think)
30. Omega Race pot based Spinner
31. Blue T-molding 20’
32. 3” marble Trackball
33. Champ Sprint pedal assembly
34. Happ Ms Pac Reunion 4-way stick (new)
35. knockoff Chinese 4-way leaf stick – one leaf switch missing (they work great for emergency spares on WICO sticks)
36. WICO microswitch joystick
37. Champ Sprint/Paperboy air vent
38. Network thing
39. Guncon 2
40. 10 gb hard drive
41. WICO trackball harness – 2 buttons and 2 optic boards
42. WICO red bat top shaft – I can pair this one with the WICO joystick
43. Ultimarc Mag Stick plus bat top, standard plate, and dust washer
44. pc case speaker
45. serial cable
46. 25 cent coin mechs (2)
47. Box o’ buttons (see pic below for detail)
48. Box o’ molex connector housings (see pic below for detail)
49. Bumper pool balls and bumpers - one bumper is busted up (see pic below)
Title: Re: TIme to clear out the junk pile - many parts for sale!!
Post by: shardian on November 15, 2009, 10:59:03 pm
List updated, sold items are scratched out.
Title: Re: TIme to clear out the junk pile - many parts for sale!!
Post by: HaRuMaN on November 16, 2009, 09:38:14 am
http://forum.arcadecontrols.com/index.php?topic=87353.0 (http://forum.arcadecontrols.com/index.php?topic=87353.0) :police

Title: Re: TIme to clear out the junk pile - many parts for sale!!
Post by: Aceldamor on November 16, 2009, 03:17:03 pm
/peale

Quote from: HarumaN on November 16, 2009, 09:38:14 am
http://forum.arcadecontrols.com/index.php?topic=87353.0 (http://forum.arcadecontrols.com/index.php?topic=87353.0) :police



/end peale
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: HaRuMaN on November 16, 2009, 03:18:08 pm
 ;D

I want Peale's job...   :burgerking:
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: shardian on November 16, 2009, 03:23:39 pm
Quote from: HarumaN on November 16, 2009, 03:18:08 pm
;D

I want Peale's job...   :burgerking:

The desire to be a MOD doesn't fade until you hit about 7k posts. ;)
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: Malenko on November 17, 2009, 11:15:45 am
Quote from: shardian on November 16, 2009, 03:23:39 pm
Quote from: HarumaN on November 16, 2009, 03:18:08 pm
;D

I want Peale's job...   :burgerking:

The desire to be a MOD doesn't fade until you hit about 7k posts. ;)

and in 940 more posts Im going to start calling you Chad. enjoy!
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: shardian on November 24, 2009, 04:14:48 pm
List updated.

I have a pile of coin mechs I still need to go through, and I have some midway coin door stuff I will soon be listing.
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: shardian on November 28, 2009, 10:01:39 am
List updated. If you are buying items, please post in this thread the item numbers. It will help me in organizing.
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: shardian on November 30, 2009, 11:35:22 am
Cyber Monday special:

Fill a USPS large flat rate box from this list for $20 shipped.
The exception items are:
11 (too big, but I could probably fit in a single chunk big enough for a CP if you wanted)
20
24
33
34

Anything else is fair game. Pick out whatever you want however much you want , and I'll stuff as much of it as I can in a large flat rate box.
First come, first serve.
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: marknetwork on December 05, 2009, 05:31:10 pm
Any buttons left?
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: shardian on December 05, 2009, 06:16:10 pm
buttons are all gone.
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: andrewbean90 on April 26, 2010, 11:58:52 pm
I want the light bulb fixture
Title: Re: Time to clear out the junk pile - many parts for sale!! (US/WV)
Post by: shardian on April 27, 2010, 12:44:04 am
Sorry for not closing out this thread. Everything is gone, except for some of the 1/2" black T-molding.
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: eaconner on April 27, 2010, 06:52:03 am
How did I miss out on this one?  :hissy:
Title: Re: TIme to clear out the junk pile - many parts for sale!! (US/WV)
Post by: shardian on April 27, 2010, 08:00:23 am
Oh I'll have a new junk pile here soon, but it won't be nearly as 'eclectic'. ;)