Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: stephanh on November 05, 2009, 08:51:15 am

Title: Control panel designer
Post by: stephanh on November 05, 2009, 08:51:15 am

Hey folks,
What do you recommend as a CP design software? I know there used to be online ones at mameroom.com and others but they all seem to have been discontinued.

Thanks
Steph

Title: Re: Control panel designer
Post by: Ginsu Victim on November 05, 2009, 09:25:22 am

Software is still on the mameroom site
http://www.mameroom.com/files/mameroomcpd.zip (http://www.mameroom.com/files/mameroomcpd.zip)

Title: Re: Control panel designer
Post by: stephanh on November 05, 2009, 09:27:55 am

Thanks Ginzu Victim. I could not find the darn thing.

Title: Re: Control panel designer
Post by: Kordova on November 05, 2009, 11:18:14 am

I used the mameroom CPDesigner for my control panel.  It worked very well and came out exactly as I wanted it.  Make sure to lookout however at putting admin buttons on the far left edge of the control panel, they will interfere wither the P1 joystick.