Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: jginiso on July 17, 2003, 08:42:13 pm

Title: Mamewah and NES EMU
Post by: jginiso on July 17, 2003, 08:42:13 pm

Ive been struggling to set up Nester, RockNESX, VirtuaNES etc. to work correctly in Mamewah. My problem is exiting the emu on ESC. Instead of going to Mamewah it goes back to the emu GUI. I tried them all but obviously only need to get one of them to work. Any help would be appreciated.
Thanks
James

P4
WinXP

Title: Re:Mamewah and NES EMU
Post by: boarderguy41 on July 17, 2003, 08:53:47 pm

have you tried setting the NES emus to enter full screen mode when roms are loaded?

Title: Re:Mamewah and NES EMU
Post by: TalkingOctopus on July 17, 2003, 10:15:28 pm

You can make esc quit in the dos version of virtua nes by editing the config file.  

In the windows version, you cannot set esc to quit, however, you can set another key up to exit.  

Title: Re:Mamewah and NES EMU
Post by: visciouslymamed on July 18, 2003, 12:13:45 am

Quote

In the windows version, you cannot set esc to quit, however, you can set another key up to exit

You can set ESC to exit in the windows version. First, setup the emulator and controls as you want them. Then open your virtuanes.ini and edit this line

[ShortCut]
TBL00=18402E4026403140204000000000000017401140000000000000000000002D4012

to this

[ShortCut]
TBL00=000000000000000000000000000000000000000000000000000000000000010001

Save the file and set the read-only attribute or virtuanes will overwrite the settings. ;)

Title: Re:Mamewah and NES EMU
Post by: jginiso on July 18, 2003, 07:54:14 pm

Quote from: visciouslymamed on July 18, 2003, 12:13:45 am

Quote

In the windows version, you cannot set esc to quit, however, you can set another key up to exit

You can set ESC to exit in the windows version. First, setup the emulator and controls as you want them. Then open your virtuanes.ini and edit this line

[ShortCut]
TBL00=18402E4026403140204000000000000017401140000000000000000000002D4012

to this

[ShortCut]
TBL00=000000000000000000000000000000000000000000000000000000000000010001

Save the file and set the read-only attribute or virtuanes will overwrite the settings. ;)

Thanks Viscous this worked great!

Title: Re:Mamewah and NES EMU
Post by: Jakobud on July 18, 2003, 11:57:57 pm

Viscious...........that is brilliant.  How did you figure out that hack?  I saw all those keycodes in the ini but couldnt make sense of any of it.

Title: Re:Mamewah and NES EMU
Post by: TalkingOctopus on July 20, 2003, 01:01:19 am

zSnes is the same way.  You can set an exit key but not esc.  Do you know a work around for that as well?

Thanks alot for the virtuanes tip btw.

Title: Re:Mamewah and NES EMU
Post by: jakejake28 on July 20, 2003, 01:19:12 am

Quote from: TalkingOctopus on July 20, 2003, 01:01:19 am

zSnes is the same way.  You can set an exit key but not esc.  Do you know a work around for that as well?

Thanks alot for the virtuanes tip btw.

d/l zsnesfe the fe freindly version... thanx to wonderboy. heres a mirror

www.geocities.com/jakejake28