Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: death69inc on October 08, 2009, 03:57:25 am

Title: sharp xm-1801 cap value
Post by: death69inc on October 08, 2009, 03:57:25 am

while installing a cap kit I miss read hte cap list and pulled the c508 cap off my chassis woudlnt be a bad thing if i had not put it in the pile with the rest of the pulls then noticed i miss read the list now i have no clue what value belongs there ..... only small cap on the baord that wasnt in the kit .
have one cap from kit c605 nowhere to be found on my chassis as of yet  shrugs if anyone can help i would love to get this thing back together thanks
might be same cap who knows but it says c508 on both solder and printed side  and as stated have yet to find the c605

Title: Re: sharp xm-1801 cap value
Post by: death69inc on October 08, 2009, 05:05:15 am

think betweeen the cap list and what i had its a 10uf 100v put it in monitor up and running but now i have lines running across the screen about an inch apart about a pixel thick monitor in horz position

and found 605's location always a cap hiding there somewhere lol


   

Title: Re: sharp xm-1801 cap value
Post by: Kevin Mullins on October 08, 2009, 12:48:22 pm

Quote from: death69inc on October 08, 2009, 05:05:15 am

but now i have lines running across the screen about an inch apart about a pixel thick monitor in horz position

Try turning the SCREEN voltage down a tad with the pot on the flyback.
(top pot is typically FOCUS, bottom pot is SCREEN)