Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: John Zzz on October 05, 2009, 12:42:36 am

Title: Need advice on Rowe R87 trouble
Post by: John Zzz on October 05, 2009, 12:42:36 am

Upon power up, my Rowe R87 enters "continuous play" mode regardless of the play switch setting. After pressing "clear selection memory", all is normal. Any clues as to what might cause the juke to power up to "continuous play" mode? All opinions will be appreciated.
Thank You!
John Zzz

Title: Re: Need advice on Rowe R87 trouble
Post by: ami-man on October 05, 2009, 06:06:59 am

Hi,

You have a fault more than likely on your CCC.
You need to send your boards for testing, I would send the following so they can be tested and inspected for dry joints (called cold joints in the USA):-

CCC
Mechanism Control
Pricing Board

They need to go to a Rowe Ami speciaist for repair.

Regards
Alan Hood
ami-man
UK
alan-hood@datex.co.uk

Title: Re: Need advice on Rowe R87 trouble
Post by: John Zzz on October 05, 2009, 11:45:05 am

Thank you Alan, I'll have a look and report back.

Title: Re: Need advice on Rowe R87 trouble
Post by: John Zzz on October 29, 2009, 12:50:43 pm

Alan,
You were correct, the CCC had multiple troubles. The board was professionally repaired by Bruce Wentworth at A&B Jukebox Repair.

Thank you for your help.
John Zzz

Title: Re: Need advice on Rowe R87 trouble
Post by: ami-man on October 30, 2009, 08:16:47 am

Hi John,

Glad to hear that you have sorted out your problems on the CCC.
On your side of the pond Bruce is the man! and his work is legendary.

Regards
Alan Hood
ami-man
UK