The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: powerplay on October 02, 2009, 09:22:09 am

Title: POLO/2 28 Star chassis
Post by: powerplay on October 02, 2009, 09:22:09 am

This is a POLO/2 28 Star chassis.  We are looking for these 3 caps locations on this particular board.

C101   (Gray cap)  1N5J 1600V
C110   ( Blue cap)   4.7  1kV
C 99    (Blue cap)   8.2 NFJ 1600V
All ceramic caps

T22    (What value it should be) (Horizontal high output)

We want to know what replacement parts we can use for these components. I could not find these in Mouser.  On T22 (horizontal output) a previous tech had remove the component without labeling the part.  We have no schematic on this board as well.  We want to know what value it is or what values we can use.  I have added pictures so you could see the board & the area where the caps are located.  The caps are located in the High Voltage section.  You guys are always of great help; hope someone can help us out.  Thanks guys

 
Hantarex Polo/2 28 Star Board Pic

http://i687.photobucket.com/albums/vv234/Powerplay800/Hanarex2.jpg

Hantarex Polo/2 28 Star High Voltage Section Pic

http://i687.photobucket.com/albums/vv234/Powerplay800/Hanarex1.jpg

Title: Re: POLO/2 28 Star chassis
Post by: grantspain on October 02, 2009, 03:24:35 pm

t22 on a polostar chassis is BU2727AW-there are plenty of equivilents
you are also missing the heat conductor shield that t22 bolts to

those caps are polypropelene not ceramic