Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: RUP on September 27, 2009, 12:48:36 pm
-
Does anyone know how to remove the Joysticks from an SNK P.O.W. control panel? I took off the nuts but there seems to be another star shaped nut behind it. Do I need a special nut driver to remove this? Please help! Thanks, Rup
-
Would it be possible to take a picture?
-
The star shaped nut turned out to be a washer. I got that off but there is still something holding it on. Here's a picture. Thanks for ther help!
-
I see nothing. Are you sure the base isn't just tight around the bolt?
-
It should just come right out because that is all that is holding my joysticks in place are those 4 bolts and nuts unless the :tool: that worked on the machine before put some sort of glue.
-
Hey Guys, Thanks for the help! After I got the washers out of the bolt holes I used the tool below to get under the control panel and the joystick to pry it off the bolts! Thanks again!
-
So I guess there was some sort of glue if you had to pry it off?
-
Yes there was some sort of glue in and around the bolt holes!!! Never underestimate the power of stupid people I guess! Why would you think you need glue there?!?!