Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: dieseldogpi on September 05, 2009, 11:23:06 am

Title: Leg levers for Golden Tee
Post by: dieseldogpi on September 05, 2009, 11:23:06 am

I need new leg levers for my Golden Tee machine.  I read it weighs in at about 320 lbs.  The leg levers I see on the Suzo happ site say load of 200 lbs.  Since there are four levers, does that mean the cheap ones can hold 800 lbs.  Or are they saying that there is a 200 lbs max limit?  Might sound like a stupid question, but whatever.  Thanks.

Title: Re: Leg levers for Golden Tee
Post by: SirPeale on September 05, 2009, 12:29:36 pm

Dedicated unit?

Title: Re: Leg levers for Golden Tee
Post by: Kevin Mullins on September 05, 2009, 02:05:57 pm

Any time you see ratings like that it's on an INDIVIDUAL basis.
So yes, they are rated at 200lbs EACH.

(heck, it's basically a vertically standing 3/8" bolt with a foot on it ..... I would hope it would holds 200lbs)
 :P

Title: Re: Leg levers for Golden Tee
Post by: dieseldogpi on September 05, 2009, 03:07:47 pm

Dedicated unit....Thanks for the info.

Title: Re: Leg levers for Golden Tee
Post by: SirPeale on September 05, 2009, 06:01:48 pm

I also have levelers on my site, check it out.