Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: GuyDanger on August 31, 2009, 04:19:40 pm

Title: Need Help - Building MAME cabinet - Kitchener Ontario
Post by: GuyDanger on August 31, 2009, 04:19:40 pm

I have a Killer instinct 2 cabinet that I would like to convert over to a MAME cabinet. The main area I need help in is connecting the monitor to a computer. I have checked the forums, and Im just not confident enough in doing it myself. :dunno

Thanks in advance

Title: Re: Need Help - Building MAME cabinet - Kitchener Ontario
Post by: BobA on August 31, 2009, 06:11:34 pm

If you have already looked around you know about the ipac and jpac.    To interface a regular arcade monitor to a pc you should use the arcade vga from ultimarc.

http://www.ultimarc.com/avgainf.html (http://www.ultimarc.com/avgainf.html)

Title: Re: Need Help - Building MAME cabinet - Kitchener Ontario
Post by: GuyDanger on September 01, 2009, 09:15:47 am

Thanks...I'll get one. I'm going to check the forums but any idea on the use of the big power supply in the botom of the cabinet?

Sorry for being such a newbie...I'll pay it forward though

Thanks again