Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: supadave on August 17, 2009, 09:18:11 pm

Title: Neotec 36" 3501 Chassis RCA Tube Advice Pls
Post by: supadave on August 17, 2009, 09:18:11 pm

Neotec 36" 3501 Chassis RCA Tube

A showcase cab I'm looking at has one of these in it. However, the picture is dim. I turned the brightness up on both the control and flyback. No go.. Is this more than likely a Tube problem or is it chassis related?  The tube is an RCA btw. I do not want to have any part of this if the majority believe it to be a tube issue. A chassis issue I can deal with.. I'm just looking for some feedback from some more experianced monitor techs..

Thanks

Title: Re: Neotec 36" 3501 Chassis RCA Tube Advice Pls
Post by: supadave on August 18, 2009, 06:15:34 am

Also, What about a tube swap.. Are those possible on the big 36 inchers?

Title: Re: Neotec 36" 3501 Chassis RCA Tube Advice Pls
Post by: grantspain on August 18, 2009, 02:48:58 pm

could be just a few leaky caps causing the problem,i guess you have tried all the colour gains and contrast

Title: Re: Neotec 36" 3501 Chassis RCA Tube Advice Pls
Post by: supadave on August 18, 2009, 08:27:54 pm

Yeah I have tried all the gains could find.  I've been getting some tips from some users and it sounds more and more like a chassis issue. which is good... well, cheaper than tube issues.

Quote from: grantspain on August 18, 2009, 02:48:58 pm

could be just a few leaky caps causing the problem,i guess you have tried all the colour gains and contrast