Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Dr Zero on August 14, 2009, 08:27:51 pm
-
Does anyone know the inside dimensions from side to side of the control panel area of a HS-2?
-
im working right now but i will try and find out if ive got an hs-2 in a bit. if i do ill measure it for you.
-
im working right now but i will try and find out if ive got an hs-2 in a bit. if i do ill measure it for you.
okay, According to this, http://www.arcadeflyers.com/?page=flyer&db=videodb&id=4830&image=2, ive got an hs-2 as best as i can see.
Your width on the metal control panel itself button wise is 25 3/4 inches. Your depth is 8 inches.
-
sorry i forgot to correct for the wood pieces that would be in your way. your workable area is about 24 inches wide.
-
Thank you for the response! I was not sure and they fellow was about to drive almost an hour to bring it so I went ahead and bought it.
I figured if I didnt use it someone here might could, thank you for getting back with me though!
I got a dynamo hs2 control panel and a centuri control panel along with some other goodies.
-
im kinda curious where you bought these goodies from. Im originally from South Florida, and the whole time i was growing up, HS and college, i used to absolutely clean up at the Swap Shop Flea Market in Fort Lauderdale.
All kinds of charachters would show up there with boxes and boxes of junk, including decomissioned game parts or anything else in the world you were looking for. I could almost always make an offer on the whole box too.
where abouts in north florida are you, and is their anything equivalent there?
thats one of the sad things about living in Alabama is that their is no humungous place here where people willingly give away boxes of old 2600 stuff for a hotdog and a beer.