Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: ratsflif on July 30, 2009, 09:48:35 pm

Title: NANAO MS2931 Service (factory) menu
Post by: ratsflif on July 30, 2009, 09:48:35 pm

Hey,

I have a NANAO MS2931 in my blast city and wanted to know if and how I can get to the service menu.  The osd only has options for the size, position, contrast, brightness and degauss.  I think there is an expanded menu but I do not know how to get to it.

Thanks for any help.

Title: Re: NANAO MS2931 Service (factory) menu
Post by: grantspain on July 31, 2009, 03:32:01 am

you hold down one of the buttons and press service,it gives many options

Title: Re: NANAO MS2931 Service (factory) menu
Post by: ratsflif on August 04, 2009, 05:05:53 pm

I still cannot get into the factory menu.  There are 3 buttons one called (in/out/mode) then one button for up and one button for down.  I have tried all the combinations and holding them for periods of time but no luck.

Title: Re: NANAO MS2931 Service (factory) menu
Post by: grantspain on August 05, 2009, 02:28:52 am

i did it the other day whilst working on a few blast city,right i think you hold down the mode button for 5 seconds