Build Your Own Arcade Controls Forum

Main => Consoles => Topic started by: dppham on July 24, 2009, 04:42:51 pm

Title: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: dppham on July 24, 2009, 04:42:51 pm: ive got two pcb boards. not the same.. one hard and one easy. but i dont know which is which. also i know aobut the 2 resistor and npn transitor but i dont know the high low wiper. heres the pic of my two boards

GAM 4716-1 ver. E Front
http://i901.photobucket.com/albums/ac211/dppham/IMG00039-20090714-2220.jpg
back
http://i901.photobucket.com/albums/ac211/dppham/IMG00040-20090714-2220.jpg

4716-1 ver. G PCB Front
http://i901.photobucket.com/albums/ac211/dppham/IMG00041-20090714-2221.jpg
back
http://i901.photobucket.com/albums/ac211/dppham/IMG00042-20090714-2221.jpg

this is the trigger resistor, trans i went by.
http://i901.photobucket.com/albums/ac211/dppham/diagram.jpg
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: dppham on July 28, 2009, 01:59:38 pm: ANYONE ??
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: HaRuMaN on July 28, 2009, 02:09:00 pm: Hey, missed this the first time around. I'll have to look when I get home, I have my own diagram, I don't go by high / mid / wiper / whatever... I just wire mine base on position: outside, inside, or middle.
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: dppham on July 31, 2009, 12:49:23 pm: thank you i'll be waiting for your respones. one more thing.. does both of those pcb board need the transistor resitor
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: HaRuMaN on August 08, 2009, 08:36:57 pm: Sorry for the delay.

in refers to the point on the inside of the PCB, out is the point closest to the outside.

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=90051.0;attach=129181;image)

Also, if you open it up and it looks like this, you have the older (easier, doesn't need transistors) PCB.

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=90051.0;attach=129183;image)
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: dppham on August 09, 2009, 10:51:17 pm: i have one that looks like the older version.. so if i don tneed transistor. how will i hookd up the trigger for it?
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: HaRuMaN on August 10, 2009, 07:25:54 am: Quote from: dppham on August 09, 2009, 10:51:17 pm
i have one that looks like the older version.. so if i don tneed transistor. how will i hookd up the trigger for it?

Leave the pot on, and just connect a wire to the center leg. That's all.
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: dppham on August 11, 2009, 12:49:02 pm: im sorry making it compicated for you.. i did this like a month ago.. and i thru away the pod. is their another way to make it seem like i hav a pod on?
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: HaRuMaN on August 11, 2009, 12:54:24 pm: Hmm. You can add resistors where the pod used to be, but I'm not sure what the values would be. I only remove them for the new version PCB (when I have to use all the transistors). You may have luck with a search at shoryuken forums.
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: dppham on August 12, 2009, 10:47:36 am: on the picture u shown up on top.. where the right top button , theirs two gray wires. whats that for?
Title: Re: Madkatz 360 controller Joystick Arcarde mod (harumaN need y0 help)
Post by: HaRuMaN on August 12, 2009, 05:04:46 pm: I think the second grey wire (far right) is just the other end of the first, curled around out of the picture. Looks to be the wire for the RB.