Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: ROBHAD on July 21, 2009, 10:09:42 am
-
I JUST PICK UP A VIRTUA COP GAME AND HAD TO TAKE IT APART TO GET IT IN MY HOUSE.. I SAW THE GAME WORKING . WHEN I RECONNECTED EVERYTHING I WAS CONNECTING THE MONITOR. AND ON THE BOARD THERE IS A SWITCH ( LOOKS LIKE AND ON AND OFF ) IN THE REAR SIDE OF THE BOARD ANYWAYS I HIT IT BY MISTAKE AND THE MONITOR TURNED OFF. NOW IT WONT TURN BACK ON.. WHAT DID I DO .AND IS THERE AN EASY FIX TO GET MY MONITOR BACK ON.. I TESTED THER MONITOR AND THERE IS POWER BUT NO PICTURE.
THE MONITOR IS A HITACHI MODEL # 40900272
-
In order to help, you need to follow this very important rule first:
http://forum.arcadecontrols.com/index.php?topic=62016.0
And please don't shout at us. Thank you.
-
SORRY I ADDED THAT TO MY POSTING..
-
SORRY I ADDED THAT TO MY POSTING..
Turn off your caps lock already...
-
not sure what you mean by turn off caps lock? what is that switch for ? whats it called?
thanks
-
not sure what you mean by turn off CAPS LOCK?
what is that switch for ? whats it called?
That "switch" looks more like an adjustment coil. Possibly horizontal width.
If you knocked into it then you need to make sure you didn't break part of it loose from the main chassis.
Ah..... I think I see what you are referring to now.
Most likely a service switch of sorts.
-
THIS SWITCH IAM SPEAKING OFF LOOKS LIKE AN ON AND OFF SWITCH. NOT THE COIL
-
THIS SWITCH IAM SPEAKING OFF LOOKS LIKE AN ON AND OFF SWITCH. NOT THE COIL
;D
-
THIS SWITCH IAM SPEAKING OFF LOOKS LIKE AN ON AND OFF SWITCH. NOT THE COIL
;D
8)
-
THE MONITOR IS A HITACHI MODEL # 40900272
I'm not coming up with any information on that model #.
Are there any other identifying marks on the main chassis? (not the tube)
-
YEA KEVIN THAT SWITCH IS WHAT IAM REFERING TO .
-
THE NUMBERS ON THE MONITOR ARE g4j001807 AND 40900272
-
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=94530.0;attach=127932;image)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=94530.0;attach=127932;image)
-
DONT NEED TO TURN OFF CAPS ITS NOT A PC.. ITS AN ARCADE GAME..
-
GMK 20P IS ALSO ON THE MONITOR
-
DONT NEED TO TURN OFF CAPS ITS NOT A PC.. ITS AN ARCADE GAME..
Turn off your caps HERE. No one wants to read your messages in ALL CAPS.
-
rofl this thread is to funny :laugh2:
is it possible it was a 120/240 switch? if so and it was powered on that would explain why it wont come back on, it's fried.
but thats a wild guess based on no monitor experience i just know on power supplies for example it's a big no no.
-
There's no way you want your hand that close in to the monitor when being incompetent enough to 'knock things', while it is powered. You realise the voltages in there could potentially kill you even if its off, and if its on then you're just asking for trouble?
And as above, please stop writing in all capitals. Thank you.
Now for your problem, it's difficult to say without a chassis model number (should be somewhere on the chassis). A close up picture of the switch would help too (in focus so we can see whats going on around it).
-
when i hit the switch there was no indication that i did something wrong meaning no smoke, snap, ect it just turned off the monitor. and i push in back and no picture
-
i just added another pic that best i can do.. the witch is right under the first white video contol knob to the left or the coiled contol.
tring to figure out what that switch is and what it does to see if i can do somthing to get the picture back
-
if it is a voltage swith how would i reset it to get the monitor back on .
-
Looks like your model # may be a Hitachi GMK-20P assuming it's a 20".
Not finding much information at all about it specifically at all.
Blow the dust of that chassis and see if there is any kind of writing near the switch.
I highly doubt it's a 120/240 switch just based on the location on the chassis.
Have you tried putting the switch back to it's original location and then completely disconnecting power from the monitor for a little while?
(I've seen power supplies do weird stuff like that)
What numbers are on the metal heatsink in this pic?
-
its is the gmk 20p so inch.. i pull the monitor out of the game hoping it would clear it out.. checked the fuse. the fuse was fine.. i did put the switch back right after i hit it.. and it didnt go back.. ill check the heatsink to see if there is a number on it..
-
My monitor only has one switch and that's to switch between positive and negative sync. When I fed it the wrong signal, it had a hissy fit for about 40 minutes and wouldn't turn on at all. Over the years I managed to do this a few times, simply walked away from it for a while and came back and it was happy again.
Are you certain the switch was all you knocked, maybe something else came loose. You need to be careful since a lot of those components could be charged and ready to shock you. When you turn it on, does it make any noise? (The regular high voltage/switching on noise)
-
nothing on the heatsink but there was a number next to the switch.s207 dont know if that helps
-
no i didnt hit anything else.. i havnt tried putting it back in the game yet.. was so frustrated that it didnt turn back on. after spending 6 hours to take it apart and put it back together becasue it wouldnt fit through the door.
before when it was on all i got was a clear screen and now nothing
-
there is no noise..normaly you would hear somthing.. i get nothing.
-
dah.. i looked at the wrong heat sink.. the number is MA00311
-
nothing on the heatsink
???
-
dah.. i looked at the wrong heat sink.. the number is MA00311
Ah.... ok then.... ;D
Just figured we'd see if that brought up any further information. (every little bit helps)
The s207 seems to be just a board location number..... doesn't help.
-
If the tube isn't receiving any High Voltage (which you would hear) then that narrows it down a fair bit. First I would make sure that all of your connections are good, all your power switches are on, when rebuilding a cabinet like that it's easy to forget something. Check the monitor's power wires and make sure nothings come loose from the transformer or anything like that as well.
Once you are sure the chassis is receiving power we can go from there.
ADD: Maybe I'm just being pedantic, but have you checked other fuses? Check through the wiring and see if there are any other fuses inline, including power supplies and including your plug.
-
i just went to hook it up again and still nothing.. there is fuses but they all look good. not burt or anything. iam lost because this thing was good before i hit that button. i was looking on it to see if there was some sort of reset to get it back but didnt see anything. this is just not making sence.
-
You need to check the fuses with a multimeter. Fuses can visually look okay, but be blown.
-
iv checked all wires again. all fuses.. everything seems to be getting juice.. no dise on the monitor yet.. is there a reset somewhere
-
Just for kicks..... try switching that switch back and forth a few times with power off.
Then put it back where it was before and turn it on.
:dunno
-
ok ill go give it a whirl
-
When you say you checked the fuses, how are you checking them?
As Peale said, you need to check them with a multimeter. Put it onto continuity test (or resistance test if thats all you have) and make sure they aren't blown. For the record a blown fuse will give infinity resistance (will show as 1.) or no continuity. Visual check doesnt guarantee anything.
If you didnt check them properly I'm willing to bet the cause of your problem could be there.
ADD: No "reset" unfortunately. Since we don't know what that switch does we can't say for sure, but you've probably either blown a fuse or fried a circuit. Fingers crossed for the fuses.
-
i just tried that.. nothing,,
i did check with my voltage tester and i got juice
-
Which wires did you test for voltage? It's possible that power is getting TO the board, but there could be fuses on the board itself meaning the monitor won't power on if they are blown. Or were you testing for voltage past the fuses? Might be worth going and getting some spares and replacing them anyway, just incase.
If it's not the fuses, all the connections are good and nothing is loose and it still won't power on then so far as I can tell that's the easy options out of the window.
-
ill go get some new fuses tommorow and replace them all just to be 100 percent and rule it out.. i tested the wires .
-
JUST PUT IN ALL NEW FUSES IN THE WHOLE MACHINE.. AND STILL NOT PICTURE.. I WOULD THINK YOU WOULD HEAR THAT SOUND THAT A SIGNAL IS GOING THROUGH . BUT I DONT. IAM LOST.
-
i just retested all the important wires with my voltage tester.. they all gave me a strong signal. what do i do next..
-
i didnt see any other fuses on the board , but then again i didnt take it apart.. is there normaly more than one?
-
JUST TOOK IT ALL APART.. THERE IS NOT OTHER FUSE..AND NOTHING IS BURT. MY NEXT PLAN IS TO GO AND TAKE EVERY WIRE OUT AND PUT EM IN ONE BY ONE.. I DONT KNOW WHAT ELSE TO DO
-
Still have the same problem. did you guys forget about me?
-
I'm afraid I have nothing else to suggest :( If it isn't loose connections or blown fuses then that points to something more serious.. which would mean at the least taking the chassis out and replacing some parts (without knowing what that switch does, we can't really say for sure). Depending on your skill level, you might want to send it off to someone to repair it if they offer a service for your monitor.. or maybe even find a new one if all else fails.
ADD:
Could you have a look, see if you can find any other names or model number identification and also tell us the size of the monitor. Maybe a hi-res picture of the chassis also would help someone here identify it if you can't find any other info on it.
-
i assumed that switch was sort of standard on the board. iv looked there is no other numbers. or markings.i guess my next step is to figure out in detail what that switch is for and how i can get it to activate again. i dont think the monitor is bad. i really think iam just missing something. i cant uderstand why a voltage switch wouldnt just turn back, in a worse case you just pull the power supply for a momemnt and it would come back. but i dont get anything. its almost like its not getting power but it is. there is only 3 things to conect. 1 is the power cord. 2nd is a blue wire that gets connected to the game contols 3rd is a connection from the pcb to the back of the monitor board, i guess this wouldnt be getting to me so much if it gave me a sign that is was turning on.. iam woundering it maybe... hum..there is a voltage box that has if i rememeber a button for 120/240 volts.. maybe that has to be reset somehow.. ill take a pic of it .. let me know what you think
-
the top picture is the box that i was talking about
-
From the pictures, that power supply box in your picture is for the game board, sadly should have no effect at all on the monitor. What that does is purely power the game pcb's in the cabinet.
Out of interest what region are you in? For some reason I thought new york but I have no idea where I got that from or if its right!
Oh and nice catch of a Virtua Cop there, im very envious ;) I love that game
It does seem like there's something amiss but without being there it's difficult to tell what! That big transformer with the 120v on it is what is powering your monitor, check through the entire wiring from that transformer back to the plug and up to the monitor and make sure nothing's loose or hiding a fuse somewhere..
-
Sorry to double post but I've been doing some digging and found out some info. I couldn't find anything on your specific GMK-20P but I found a lot on similar Hitachi GMK chassis. They are standard res - medium res switchable chassis, which means they can display different resolutions of gameboards. And that is changed by a switch. I have a feeling this is what has happened here, that you flicked the switch and changed the monitor into Standard Res mode while it was on (not advisable!) and the gameboard you are using is a Medium Res board, so the signal was not what it was expecting.
Needless to say this usually fries something, our own grantspain said in another thread I found that the HOT (horizontal output transistor) is usually the culprit.
I think step 1 here would be to confirm thats what the switch does (rub the dust off around the switch and look for any markings, saying Res, 15khz, 24khz etc.)
If this is what's happened then you would need to remove the chassis from the monitor, identify the HOT and replace the part, then hope nothing else was damaged too :(
-
checking on that switch.. lol.. i had to get out my magnifyer..lol..
the olny markings on it was 431Z and on the board S701
-
Shame there isnt any more evidence but I think theres a high probability that's what it was. It's a medium res game, switchable sync chassis... that's a switch.. lol and I did find one picture of a similar model and the switch was close to where yours is.
Sad to say it but I think you're going to have to do some repair work :( Shame for such a small error as well.
-
ok .. how do i replace "the hot" ..
-
What is your skill level as regards arcade chassis/electronics/soldering? If you put your location and aren't up to it, it's possible a close byoac'er could help you out.
First you would need to remove the monitor from the machine... then discharge the monitor (there is a guide for that in the 'MONITOR FAQ' at the top of the monitor forum), that part is very very important, then after that you can remove the chassis (the pcb) from the monitor. Then you need to identify the HOT (horizontal output transistor) and desolder it, remove the part, install a new one and solder it back in.
It's possible something else could have been damaged too, but others will be more knowledgeable about that than me..
-
iam a beginger with monitors .. but ive dont cap kits before.
iam looking at what i think needs to be replace .. there is the wire Red that goes to the monitor..
if thats it.. then i need to defuse the monitor..( i hate that)
and the one i have has a part on it that looks like there should be another wire similar to the red one.. but there is nothing there..
-
If you've done a cap kit then it won't be too much more difficult. The horizontal output transistor as the name suggests is a transistor. It will be fairly large, in the sense of maybe 2 - 3cm wide and a cm and a half high (that's just a general guide, yours may be slightly different), usually black in colour, and will probably be attatched to a heatsink. I attatched a picture of my HOT at the bottom so you know what sort of thing to look for, its very unlikely it will be exactly the same.
You shouldn't need to replace the flyback (with the red wire) however you will need to discharge/defuse it in order to take the pcb off to do the soldering. There are usually a few large transistors on your board, seeing how we cant know how extensive the damage is I would recommend you order a replacement for all the large transistors, just incase.
You will need to take down the part numbers of the transistors to order the replacements.
-
and the one i have has a part on it that looks like there should be another wire similar to the red one.. but there is nothing there..
If you are looking at what I think you are looking at, then that is a screw hole.
Nipedley - What kind of monitor do you have ?
That IC looks more like a Vertical IC.
A typical H.O.T. is a large three legged transistor.
-
Hmm it's possible, I have a Hantarex Mtc 9000. Off the top of my head I thought my HOT was a TDA1670, maybe that was one of the other parts I replaced (all of them!).
Nevertheless, the appearance should point him in the right direction.
-
i just noticed this thing is made in japan.. its going to be hard to find the part. i need to find spec sheet on this..
-
Even if it was, the parts used on the chassis should be mostly universal and available. I couldn't find a manual or anything referring to your chassis, at best 3 out of focus japanese (I can read japanese but not when it's out of focus) schematics pages for a similar GMK series chassis. Your best bet is to replace every big black transistor that looks like that, it won't cost you that much and you can be safe in the knowledge all of them will work if any of them have been damaged.
-
any idea where to buy them..
or should i just buy a new monitor.. i was hoping this problem was goin to be easy
-
Kevin was right, that was my vertical deflection IC (it's been a while). Below is the picture of my HOT (yours should be similarish in appearance).
Again where are you? If in the UK, Cricklewood electronics have provided every component I've ever required. If they don't have it they may be able to source it for you. In the US I have no idea, as I'm in the UK :) But they might ship to you anyway.
-
iam in us..
how would i test that.. ?
the same way with the tester>
-
Check with the diode/continuity function of your meter.
Look for any dead shorts between the legs.
POWER OFF !!
-
I think i found the problem.. i just tested every circut . the power blug shows bad on the meter.. some of the soter on the board it touching the soter on the fuse holder. iam thinking maybe i need a new power cord.. iam attaching a picture
-
and io did check that circut and it was fine/
-
It shows bad? How so? It's difficult to tell what you mean, and the flash whites out the picture so I can't see much there either ;D
I wouldn't worry about the solder, that wouldn't have changed through the flick of a switch anyhow.
-
yea that didnt do anything..
this is realy stressing me out.
-
um if im not mistaken down you have to test resistors, transistors, and diodes OUT side of a circuit.. IE: you have ot remove it or you'll get mixed readings..
-
iam not sure what to do next.. iam ready to give up ...
-
You could always pull the chassis and send it to someone.
-
i could but not tring to loose money on this.. and i know ill loose on the repairs...
-
Depends on who helps ya out.... where abouts are you located ?
-
new hampsire.
id fix it if i knew exactly what the problem was
-
What part of NH? I live in Brattleboro, VT.
-
right next to keene.
maybe you can come check it out sometime.
-
No kidding! Nice to meet someone local.
-
super deal .. what do you have for games.. when can you check this monitor out.