Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Chunce DeLeone on July 15, 2009, 10:06:15 am

Title: Jamma connector missing pins w/jpac
Post by: Chunce DeLeone on July 15, 2009, 10:06:15 am

I have a jamma cab hooked up to a jpac and want ot use all of the controls but some of the pins on the jamma connector are not there.  Where do I get those pins? 

Title: Re: Jamma connector missing pins w/jpac
Post by: SirPeale on July 15, 2009, 10:09:10 am

Several ways:

1) raid another JAMMA harness (or similar) for the wires and pins.

2) buy the pins and wire and add it to the harness

3) buy a whole new harness and use that.

Title: Re: Jamma connector missing pins w/jpac
Post by: Chunce DeLeone on July 15, 2009, 11:49:30 am

where can i get hte pins and wire?

Title: Re: Jamma connector missing pins w/jpac
Post by: SirPeale on July 15, 2009, 12:12:06 pm

I'm sure Bob Roberts has the pins.  Wire too, if you ask.

Title: Re: Jamma connector missing pins w/jpac
Post by: Chunce DeLeone on July 15, 2009, 03:01:57 pm

Found them at Bob's thank you SirPeale
http://arcadecontrols.com/BBBB/jam-key.jpg

This is perfect!!!!   :woot