Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: Oni2382 on July 11, 2009, 05:34:47 pm
-
Got an NFL Blitz machine a few days ago with PCB issues, but the monitor was fine, until one day I made the moronic decision to plug up a 2slot neo mobo. Since then the cab powers on but the monitor doesn't come on. I checked the fuse and it hasn't blown, so does anyone have an idea what the issue could be. Thanks for the help.
-
Plugging in another PCB shouldn't kill a monitor, though if it is indeed dead it's probably coincidental.
Are you sure the monitor isn't working? Say, the power supply decided to commit suicide or something. Does it play blind?
-
Nah it doesn't play blind....If I could swap the tube to use it in a K7000 I would, but I know the tube isn't compatible. As far as the power supply goes it works and powers on but I'm not sure about the ISO transformer. I should check that when I get a chance.
-
OK I hooked up a different PCB and it plays blind. Is there a certain thing on the chassis I should check, I know the U2000 is one of the worst chassis Wells Gardner has produced.
At least the tube is good, so should I spring for another chassis or just put in a totally different monitor? Thanks for the help.
-
Is it clicking? If not, check the B+.