Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: sk8ersublime on July 03, 2009, 06:16:47 pm
-
Hello everyone,
So I have been rapidly adding programs to my cabinet, I put on Future Pinball the other day, and its great. But a lot of my favorite tables are on Visual Pinball. So i installed Visual Pinball on my cab and got it running, but I am having an issue, I have set my Keys to the following in Visual Pin:
Left Paddle = 3
Right Paddle = 4
Coin = 5
Start = 1
tilts are = C, left Crtl, and ]
I have also set this up in PinMame by using the Tab menu.
But when I press the paddles, they add coins, it wouldnt be that bad, except that most tables make sounds when you add coins and it gets really annoying.
I have read that Visual Pinball by default uses 1-5 for paddles, coins and stuff.
So my question, how the hell do i change the default values??
Ive tried search but I can find what exactly to do.....and if it helps, im using an X-arcade DIY kit for my panel....
Thanks in advance,
Chad
-
I thought both Future Pinball and Visual Pinball used the same controls.
Many of these controls are the same keys as in MAME so I wired 2 buttons to the same pin on my IPAC.
Coin = 5 = Same as MAME
Start = 1 = Same as MAME
Left Paddle = Left Shift = P1 button 4 in MAME
Left Tilt = Z = P1 button 5 in MAME
Right Paddle = Right Shift = P3 button 2 in MAME
Right Tilt = /
Center Tilt = Space = P1 button 3 in MAME
Plunger = Enter = P3 button 3 in MAME
Are you implying that it works in Future Pinball, but you had to resort to this odd mapping for Visual Pinball?
-
Future Pinball works fine. All keys only press what they are suppose to.
but in Visual Pinball w/ PinMame, when i press '3' or '4' which is what the X-arcade default side buttons are, it is the right/left flipper, and it adds coins.
I have changed the Keys in both Visual Pinball, and PinMame, so I am guessing that they are hardcoded in some file and its not changing when I make the changes.