Build Your Own Arcade Controls Forum
Main => Software Forum => Topic started by: savj14 on June 30, 2009, 02:56:10 pm
-
I have a 27" WG D9200 Arcade Monitor and I'll be using MaLa as my front end.
I wanted to know what the best emulators to use are for the following(what version if it applies):
- Genesis
- NES
- SNES
- Dreamcast
- PSX
Also what Resolutions should I use for each emulator.
-
Try here:
http://nonmess.retrogames.com/
-
I collected emulators wihich is great using for emulators to been used on a cabinet:
http://www.multife.com/index.php?page=help&faq=emulator.setup
Even the link is was designed with multife in mind, it can of course too been used with other frontends since it very general. Howover not looked on PS1 emulator, which I need look on....
-
I have a 27" WG D9200 Arcade Monitor and I'll be using MaLa as my front end.
I wanted to know what the best emulators to use are for the following(what version if it applies):
- Genesis
- NES
- SNES
- Dreamcast
- PSX
Also what Resolutions should I use for each emulator.
Depends a bit on what kind of system you're running. Here's what I recommend:
NES: FCEUX or JNes (FCEUX seems to work better with frontends)
SNES: ZSNES
Dreamcast: NullDC (Dreamcast emulation might be a bit buggy depending on what you got going)
PSX: ePSXe
Those are just my personal perferences. Monitor resolution of course depends on your monitor. 640 x 480 should be fine for all, might want to bump it up for Dreamcast emulation in order to fully enjoy the greatness that is Dreamcast.
-
On a related note, is there any other emulator for 3d0 other than Freedo. It seems quite buggy and the latest version appears to only have russian text in it :(