Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: powerplay on June 29, 2009, 08:49:54 am
-
I have a Neotec NT-2701. I have attached links to pictures to show preoblem & monitor chassis. I have done about everything possible to fix this usual easy error which is Vertical deflection (Horizontal line in the middle). Here is what's been done on this chassis:
Complete capkit
"Chicklet Cap kit" - C419 - C421 - C423 & C450
IC301 has been changed twice
Tried another control board from a working chassis
Tried another set up with another yoke and problem still there.
Is there anything else I could look at? If there's any other information I did not share and it's needed please do let me know. As always thanks for all the help guys..
Chassis 1
http://i687.photobucket.com/albums/vv234/Powerplay800/neotec4.jpg
Chassis 2
http://i687.photobucket.com/albums/vv234/Powerplay800/neotec3.jpg
Problem 1
http://i687.photobucket.com/albums/vv234/Powerplay800/neotec1.jpg
Problem pic 2
http://i687.photobucket.com/albums/vv234/Powerplay800/neotec2.jpg