Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: mariox2098 on June 24, 2009, 02:23:16 pm

Title: happ comptetition question
Post by: mariox2098 on June 24, 2009, 02:23:16 pm

Well i set up the joystick but there doesnt seem to be any space for the E clip to connect to the metal rod. I knew i wouldnt be able to explain it well so i took a picture. Am i doing something wrong here?
 (http://mariox2098.googlepages.com/CIMG1033.JPG)

Title: Re: happ comptetition question
Post by: Ginsu Victim on June 24, 2009, 02:28:45 pm

You need to push it down. There's a spring pushing it up, so you have to push it back. Also, where's the actuator? It should be square.

Title: Re: happ comptetition question
Post by: mariox2098 on June 24, 2009, 02:35:58 pm

I tried pushing it down really hard but its not budging and i feel like i might break it lol. btw, I just left the actuator off for the picture.

Title: Re: happ comptetition question
Post by: Ginsu Victim on June 24, 2009, 02:39:15 pm

Are you pushing back against the knob of the stick itself? If not, you'll get nowhere.

Title: Re: happ comptetition question
Post by: RandyT on June 24, 2009, 03:13:02 pm

Put the square actuator on there and push down on it (the actuator).  It should expose the groove.

RandyT

Title: Re: happ comptetition question
Post by: Ginsu Victim on June 24, 2009, 03:17:39 pm

Yeah, now combine what Randy said and what I said.

Title: Re: happ comptetition question
Post by: mariox2098 on June 24, 2009, 04:18:58 pm

i got it. thanks for the help guys