Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: FrizzleFried on June 10, 2009, 05:42:09 pm

Title: GREEN BKG Trimmer Pot Value
Post by: FrizzleFried on June 10, 2009, 05:42:09 pm

The Green BKG Trimmer Pot on my Eygo/Wei-Ya G07 replacement chassis neckboard is trashed.  Anyone know the correct value to replace it with?   

Title: Re: GREEN BKG Trimmer Pot Value
Post by: FrizzleFried on June 10, 2009, 07:35:20 pm

The answer is: 10Kohms...

Title: Re: GREEN BKG Trimmer Pot Value
Post by: Kevin Mullins on June 10, 2009, 07:46:30 pm

Available schematics state 5K......but when in doubt, measure one of the others of similar function. (i.e. Red, Green, Blue pots)

Title: Re: GREEN BKG Trimmer Pot Value
Post by: FrizzleFried on June 10, 2009, 07:50:43 pm

Quote from: Kevin Mullins on June 10, 2009, 07:46:30 pm

Available schematics state 5K......but when in doubt, measure one of the others of similar function. (i.e. Red, Green, Blue pots)

The pot itself has "103"...

...and I was told 103 = 10K ohm?

Title: Re: GREEN BKG Trimmer Pot Value
Post by: FrizzleFried on June 10, 2009, 10:25:50 pm

Welp... the 10K pot worked.  I did find 5K pots on the remote adjustment boards though...

Title: Re: GREEN BKG Trimmer Pot Value
Post by: Kevin Mullins on June 10, 2009, 11:58:09 pm

Yeah, if it was marked with the 103 then that's a 10K.   :cheers:

There's been other discrepencies like whether it's a 5K or a 10K pot found on schematics from some of these.