The NEW Build Your Own Arcade Controls

Front End Support => MaLa Frontend => Topic started by: danfman on May 14, 2009, 12:44:57 pm

Title: load/save
Post by: danfman on May 14, 2009, 12:44:57 pm

I originally posted this under the software category, but got no responses.  

http://forum.arcadecontrols.com/index.php?topic=92299.0

Was hoping someone over here might be able to help.

The default to save or load a game in mame is F7 and Shift F7.  I changed this so I could use my joystick/buttons.  But after you initiate a save or load you then have to "select position to load/save from" but then I have to use a number key from the keyboard, which kind of defeats the purpose of using the joystick/buttons to save/load.

Is there a way to "select position to load/save from" using the joystick/buttons?

Title: Re: load/save
Post by: jasonbar on May 14, 2009, 04:04:16 pm

I don't know of a way around this, but I already have keys 1-8 mapped to my control panel for P1-P4 coins & starts, so those are easily accessible (and relatively easy to remember & use for this purpose).

-Jason

Title: Re: load/save
Post by: dungbeetle46 on May 14, 2009, 10:09:01 pm

you should be able to save to either
z x c v
Its only ctrl alt space and shift that wont work

Title: Re: load/save
Post by: danfman on May 15, 2009, 12:54:56 pm

Thanks for the advice, dungbeetle.  But I am a little unclear by your answer.  How will mapping the save locations to z x c v help me to save to the choose a save location from the joystick/buttons?

Title: Re: load/save
Post by: dungbeetle46 on May 15, 2009, 08:00:46 pm

zxcv are buttons 5678, if you only have 4 buttons then no it doesnt help but if you have six buttons then you can save and load from z and x, I have 6 buttons plus 2 for pinball which gives me zxcv.
cheers