Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: Biscuit on April 30, 2009, 08:25:57 pm
-
I just bought a new 19" Vision Pro shelf mount monitor to replace the one in an old Ms. Pac cab that had been turned into a Black Tiger machine. I have a 48-1 running on it. My problem is, I don't know anything about installing the new monitor and it came with no instructions whatsoever. The old monitor is a Shinlee.
I took a few pictures that I hope will help one of you kind souls walk me through the process. I have safely discharged the Shinlee monitor a few times, so I'm somewhat versed in that. I just don't know what to hook to what!
Here's the Vision Pro:
(http://i711.photobucket.com/albums/ww113/ihatepotatochips/037.jpg)
(http://i711.photobucket.com/albums/ww113/ihatepotatochips/036.jpg)
Here's the bottom of my cab. That vertical box is a switching power supply is that right? I'm not exactly sure what the other two components beside the vertical box are.
(http://i711.photobucket.com/albums/ww113/ihatepotatochips/039.jpg)
Here's the 48-1 board with the Jamma harness.
(http://i711.photobucket.com/albums/ww113/ihatepotatochips/040.jpg)
Picture of the chassis.
(http://i711.photobucket.com/albums/ww113/ihatepotatochips/041.jpg)
Seems like the two wires soldered wires at the top are from the power supply cord to a connector that read something along the lines of a isolation transformer being required. :dunno
(http://i711.photobucket.com/albums/ww113/ihatepotatochips/042.jpg)
(http://i711.photobucket.com/albums/ww113/ihatepotatochips/044.jpg)
Picture of some wires coming up from the harness to the chassis.
(http://i711.photobucket.com/albums/ww113/ihatepotatochips/043.jpg)
Can anyone help out a complete noob? Or maybe point me to some resources on the net?
Thanks!
Biscuit