Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: Firebat138 on April 28, 2009, 03:43:33 pm
-
I have decided on the Sansui DTV 2760 for the cab... My question...
Has anyone used this TV for their cab...if so....which vid card did you use...
I see a lot of threads on the 640x whatever reolution... What would be the reason to use that res....I am using Maximus, so I have all the mame side art , bezels and etc... I would probably keep these on... MAN...there is so much to know... Sears has this TV on sale for $20.00 off this week, so I could get it for $215.99. Thanx all for your help...
Camper
-
Another question...Ok...Defenetly getting this TV, but the cab is about 1/2" too big... MY arcade cab is 25" and the TV is 25.6. SO....should I rebuild the cab, at least the top half... I am using UAII plans for the build, or should I take the case off the TV. Which would be easier and safer...etc..etc... I have a friend that is a TV repair dude, so he could probably discharge the TV for me... Thanx all for your help
Camper
-
if ur "TV repair dude/friend" is any good . then enlicit his assistance .
then you would not need to worry about any safety issues .
if he will allow u to observe the process, it may be a learning opportunity....
FYI,
i am a "TV repair dude " whom added arcade related servicing - had to diversify a bit ;)
qrz