Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: phatmeat on April 25, 2009, 10:25:23 am

Title: WG 33K3201 Info Needed
Post by: phatmeat on April 25, 2009, 10:25:23 am

WG 33K3201 Info Needed
   Anyone have any information on this 33" Wells Gardner display. It has a rolling issue now , but I'm unable to look into till I find some information . It has the P805 Chasis

 Thank You

Title: Re: WG 33K3201 Info Needed
Post by: Kevin Mullins on April 25, 2009, 11:37:50 am

Parts:
Chassis - http://www.wellsgardner.com/bom/P805.pdf
Neckboard - http://www.wellsgardner.com/bom/P583.pdf

Schematic - http://www.wellsgardner.com/pdf/Schematics/U3000_27_inch.pdf
Board Layout - http://www.wellsgardner.com/pdf/Board/U3000_27_inch.pdf

Title: Re: WG 33K3201 Info Needed
Post by: phatmeat on April 25, 2009, 03:17:47 pm

Thank You... Any tips on things to watch out for ?

Title: Re: WG 33K3201 Info Needed
Post by: Kevin Mullins on April 25, 2009, 05:18:16 pm

Just look to see how the SYNC is connected.

And of course try Horizontal or Vertical Holds first depending on which way it's rolling.

Title: Re: WG 33K3201 Info Needed
Post by: phatmeat on April 28, 2009, 10:29:21 pm

Still has crazy roll .. Hard to tell what really is up though. I have one of those cables from ultimarc with the Amp. There is only 1 sync on it .  Looks like orginal Jamma harness jumped them togther. The ground seems to be in wrong place though. The picture is there just cannot get it dialed in.
The p805 Chasis I have varies a little from the u3000 layout. Some pots are different .

Anyone know where to get a p805 chasis replacement  ?
Will a cap kit and resoldering help ?