Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Ghoward on July 02, 2003, 09:59:58 am

Title: Opti Pac mouse button?
Post by: Ghoward on July 02, 2003, 09:59:58 am

Hi

Could someone tell me if on an Opti-Pac you can connect left and right mouse buttons or is that done via the Ipac or can you do this at all.

Thank You

Gary

Title: Re:Opti Pac mouse button?
Post by: BobA on July 02, 2003, 12:46:31 pm

Quote from the Ultimarc site.

Buttons. (Optipac)

If required connect two buttons to the button connections as marked (ie Port 1 L=left button. Port 1 R=right button). For each button, one connection goes to one of the four button inputs, the other goes to any connection marked "GND". You can use your control-panel buttons which are already connected to an I-PAC board. Just wire them to both an I-PAC input and an Opti-Pac mouse button input.

BobA