Build Your Own Arcade Controls Forum

Main => Project Announcements => Topic started by: pat47200 on April 14, 2009, 03:37:22 am

Title: MY THIRD ARCADE MACHINE : MULTI-CONSOLE SYSTEM (PS2-DREAMCAST-NEOGEO)
Post by: pat47200 on April 14, 2009, 03:37:22 am

Hello,

Finished  my third Multi-console arcade machine: :applaud:

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo270.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo267.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo212.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo215.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo268.jpg)

See you soon. ;)

Title: Re: FINISH MY THIRD ARCADE MACHINE (PS2-DREAMCAST CAB)
Post by: SavannahLion on April 14, 2009, 03:52:48 am

I like the CP module. Nice clean lines. Decent artwork (not my cup of cheese though) that looks like it belongs to the CP. Seat needs a tiny bit of touchup since it seems out of place with the rest of the theme. Is it my eyes or are P1 and P2 on different horizontal planes? It looks like the P2 joystick along with the buttons are higher than the P1 side? What was the reasoning behind that design choice?

I don't like the monitor module. More can be done, much more. Especially where you display consoles. That rats nest look really knocks down the rest of the system. Think of it like someone taking their ride with a kick ass paint job to a show but losing points with torn bucket seats, mismatched harness and a crap OEM stereo.

That's just my personal opinion. It is your cab and you do with it what you will. ;)

Title: Re: FINISH MY THIRD ARCADE MACHINE (PS2-DREAMCAST CAB)
Post by: pat47200 on April 14, 2009, 06:59:50 am

Quote from: SavannahLion on April 14, 2009, 03:52:48 am

I like the CP module. Nice clean lines. Decent artwork (not my cup of cheese though) that looks like it belongs to the CP. Seat needs a tiny bit of touchup since it seems out of place with the rest of the theme. Is it my eyes or are P1 and P2 on different horizontal planes? It looks like the P2 joystick along with the buttons are higher than the P1 side? What was the reasoning behind that design choice?

Hello guy,

The original panel Euro40 cab. ( made in italia )

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo85.jpg)

You say right the P1 and P2 on different horizontal planes.
That for the 1Player right bend not obstruct the 2Player left bent. ;)

see you later.

Title: Re: FINISH MY THIRD ARCADE MACHINE (PS2-DREAMCAST CAB)
Post by: SNAAKE on April 14, 2009, 12:26:38 pm

ur cabinet is SCREAMING for a modded xbox. feed it. its hungry  >:D

looks good.

Title: Re: FINISH MY THIRD ARCADE MACHINE (PS2-DREAMCAST CAB)
Post by: BobA on April 14, 2009, 12:48:56 pm

Really different look. I have never seen that type of cab in Canada. Of course we seldom see anything different over here.   I think the seat could use padding and the wires from the botton of the screen could use a cable wrap or cover of some kind.    :applaud: :applaud:

Title: Re: FINISH MY THIRD ARCADE MACHINE (PS2-DREAMCAST CAB)
Post by: pat47200 on April 20, 2009, 03:17:18 pm

Some news for fun, i bought 3 transparent balls seimitsu :

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo303.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo302.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo299.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo295.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo293.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo289.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo294.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo297.jpg)

See you soon :)

Title: Re: FINISH MY THIRD ARCADE MACHINE (PS2-DREAMCAST CAB)
Post by: Gatsu on April 20, 2009, 08:02:11 pm

looks really good man. those new balltops add a little more zazz to the cab. small details like that make a big difference.

Title: Re: MY THIRD ARCADE MACHINE (PS2-DREAMCAST-NEOGEO CAB)
Post by: pat47200 on May 11, 2009, 09:40:08 am

Hello Men,

And now the NEOGEO inside.

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo332.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo333.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo335.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo336.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo343.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo349.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo355.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo363.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo357.jpg)

(http://pagesperso-orange.fr/ultimate.arcade/fichiers2/photo362.jpg)

See you soon.... ;)

Title: Re: MY THIRD ARCADE MACHINE (PS2-DREAMCAST-NEOGEO CAB)
Post by: garykagan on May 11, 2009, 04:42:40 pm

very cool and very interesting.  Love the wiring.   :)