Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: hansblix on April 04, 2009, 07:31:52 pm

Title: Need help with Ducksan Monitor
Post by: hansblix on April 04, 2009, 07:31:52 pm

I recently bought a Time Crisis 2 cabinet which needs a video cable.  This has a 10-pin connection for video and from the research I've done appears to be very close to the Ducksan CGM1301 but the markings on the board are positioned a little differently. From what I can discern from just looking the pins seem to be as follows.

0 - red
0 - ?
0 - green
0 - ?
0 - blue
0 - ?
0 - ?
0 - ?
0 - hsync / vsync
0 - GND ?

The board say DS-2905 Main Unit Rev. 2. If anyone can point me to a schematic for this or knows what the pins pictured correspond to I would very much appreciate it, I'm pretty new to all this.

Title: Re: Need help with Ducksan Monitor
Post by: Ken Layton on April 06, 2009, 09:58:56 am

I haven't encountered that model of Ducksan before.

Title: Re: Need help with Ducksan Monitor
Post by: Ummon on April 06, 2009, 05:54:45 pm

......heheheheheh. Ahem. Notice the little marked letters in front of the pins in image 2. The only thing missing I guess is G.