Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Franco B on March 30, 2009, 03:59:57 am

Title: Happ Competiton Shaft Dimensions?
Post by: Franco B on March 30, 2009, 03:59:57 am

Does anyone have the dimensions of the Happ competition shaft?

I'm after the following lengths + the diameters of the shaft.

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=90051.0;attach=120980;image)

A: Distance from the end of the shaft to the start of the e-clip groove

B: Distance from the end of the shaft to the start of the 2nd e-clip groove (or 2nd shaft diameter)

C: Distance from the end of the shaft to the bottom of the bat.

D: Ignore, I know its 146mm

I'm not sure if the 2nd 'line' on the shaft is a second e-clip groove or a change in diameter.

IIRC, the black section below the bat is a sleeve. Is that correct?

If you could also tell me the dimensions of the diameters of the shaft, including the e-clip groove(s) that would also be great.

I doubt if anyone has this data to hand but if someone with a digital vernier etc has a comp stick that they could measure I would appreciate it.  :cheers:

Title: Re: Happ Competiton Shaft Dimensions?
Post by: kowal on March 31, 2009, 11:58:41 am

iL euro joystick

C-88mm
D-147mm
A-2mm
B-9mm

and E - 19mm (III groove)

competion
C-89mm
D-146mm
A-2mm
B-9mm
E-19,5mm

Title: Re: Happ Competiton Shaft Dimensions?
Post by: Franco B on March 31, 2009, 12:54:07 pm

Thank you kowal  :notworthy:  :cheers:

Title: Re: Happ Competiton Shaft Dimensions?
Post by: kowal on March 31, 2009, 03:22:24 pm

groove is 1mm

shaft on end fi=10mm
groove fi=7mm
shaft cover fi=14,5mm iL, competion 14,7mm
battop fi=32mm on iL and fi=31,5 on competion
fi is diameter

You need this dimensions for custom balltop?

Title: Re: Happ Competiton Shaft Dimensions?
Post by: Franco B on March 31, 2009, 03:39:15 pm

Yeah, I'm making some Comp shafts with an M6x1 thread for the Seimitsu ball tops.

Title: Re: Happ Competiton Shaft Dimensions?
Post by: Grasshopper on March 31, 2009, 04:46:04 pm

For future reference, the dimensions of all the Happ joysticks can be found on the manufacturer's website:

www.industrias-lorenzo.com