Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: penguinkj on March 16, 2009, 03:13:13 am

Title: optical sensor board
Post by: penguinkj on March 16, 2009, 03:13:13 am

Hey all, I am reworking my arcade to include both a spinner and trackball, I am using the optipac to do this and have a happ trackball and tornado spinner with ps2/usb.  I was able to connect the trackball easily however am having trouble figuring out how the spinner is set up, through looking at sites online it looks as though I will have to build my own optical sensor board but have no experience with this sort of task.  Has anyone here done that or have any advice/info to share... I found the following websites but the directions unfortunately seem to be over my head.  If anyone knows anyone selling such a product I would be super enthused, thanks again, Karen j.

http://www.ultimarc.com/optipac4.html
http://www.kabinett.homepage.t-online.de/knowldge/stick/controls.htm

Title: Re: optical sensor board
Post by: Encryptor on March 16, 2009, 03:24:13 am

Your spinner should already have them but if they are missing try here.

http://forum.arcadecontrols.com/index.php?topic=48855.0



Encryptor