Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: m_mcgover on March 11, 2009, 06:29:47 am
-
Star Wars EMI Shield PCB:
This the the PCB at the end of the Star Wars PCB stack that sits outside of the metal EMI cage that the wiring harness connects to. This PCB connects the Star Wars Main PCB and AVG PCB. This is not the small, interconnect PCB.
Reduced $12. Now asking $30 shipped in the continental US. PM if interested.
Star Wars Marquee Header Assembly: (SOLD)
Here is a marquee header assembly for a Star Wars upright. This was an extra with the recent upright cabinet I picked up. This is an original marquee. The marquee over the glass is in nice shape. There is some minor cracking on the lower bend and a tear on the very top right hand side (that is not visible with the marquee attached). The wood also has a crack in one of the corners, but it does not go all the way through and should be glue-able w/o removing the marquee.
I've attached some pictures below. You can see more of them by following this link and looking at the most recent 11 pictures
http://www.flickr.com/photos/12090271@N02/
This is a heavy item. Asking $50 + actual shipping costs. PM if interested. For shipping estimates, figure a 10 pound box that is 12"X12"X34" in dimensions. Should be < $18 (I estimated shipping via Fedex to California from NJ...if you are closer, shipping should be less). If you think $50 is too high, you can always PM me a reasonable offer.
Coming soon - Star Wars Yoke
Still needs to be tested but is complete Star Wars Yoke. Replaced thumb/trigger switches (they test as working). Should have tested by end of next week. PM if you are interested in purchasing it "untested."
-
Bump. Reduced price on PCB, more details on header shipping.
-
Bump. Marquee is sold.
Still have EMI shield and Yoke.
Would consider shipping EMI shield internationally, but there would be additional postage required.
PM any interest. Pretty soon these are going to hit ebay.