Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: Billy on March 04, 2009, 07:01:01 pm
-
I have an old samsung tube out of a 25 inch magnavox.
SAMSUNG
TYPE# A63QDB891X01
PART# 9322-151-39682
Here are my measurements.
Size of the CRT: ______25________
Vertical ohms: ________7_________
Horizontal ohms: ______3_________
10 pin connector
So what the best chassis to buy for this rig?
-
Will either one of these chassis even work for this magnavox tv made in 2000?
-
i have both and in my opinion the jenshin is better i have been running one on a 27 inch tv tube for about a year now and haven't had any problem
-
I concur... I have had better image quality and more generic yoke compatability for geometry and no blurrines, blooming and pulsing when brightness changes with JenShin on numerous 19" tubes. I have tried one of each for 25" as well and had similar results.
-
Who actually sells the Jen Shinns in the US ?
I've contacted them directly and they don't have a representation in Europe but the guy said I can buy directly, but in my experience these guys expect orders in 20' containers, not something between 1 and 4.
-
I do believe 8liners.com sells the JenShin. If this works out I will have a 25 inch monitor for less than 100 bucks. I would say saving 300 large on a 25 inch is one heck of a deal.
The tv didn't cost jack and the frame I robbed from out of the wells that came in the cab. So spending 100 on this seems like a great idea to me.
Heck If I could find a good place to buy new frame kits. I could build monitors and sell/trade them out on the cheap to the local guys around my area.
-
I put a Wei Ya on my 25" WG monitor in my Mortal Kombat, and I've been happy with it. I bought mine from a US distributer, Alva Amusements.
-
the weiya is for old school game like pacman donkeykong etc it look like crap on newer games like streetfighter
-
That's weird. In what respect would the older games require a less quality monitor ?
-
the 826 chassis i have pulses when the screen goes black and it doesn't have contras control
-
Ah I see. No other issues like sharpness, colors etc.?
I guess the old games don't "flash" that much with brightness etc.
Would your 826 look (somewhat) like this:
(http://www.grebo.eu/arcadegames/shop/images/prodimages/chassis_14-20.jpg) ?
-
mines the same except it has a remote adjustment board
-
Who actually sells the Jen Shinns in the US ?
I've contacted them directly and they don't have a representation in Europe but the guy said I can buy directly, but in my experience these guys expect orders in 20' containers, not something between 1 and 4.
8liners.com (Atlas Amusement/Victor Genoa) is the ONLY seller of the Jen Shinn replacement chassis in North America. I understand they might only sell Wei-ya chassis now (not confirmed).
http://www.8liners.com/datatech/monitor.html
Purchase link:
http://www.genao.com/osc/catalog/index.php?cPath=22&osCsid=b939df19066f8d147e9f54b6eba99986
How to convert a Hantarex "Polo" monitor with one of these chassis:
http://www.retroblast.com/2006020558/Articles/25-Hanatrex-Polo-Monitor-to-8Liners-Chassis-Conversion.php
Manufacturer's website:
http://www.jenshinn.com.tw/chassis.htm
Website may be slow to load or inaccessible at certain times.
Here's the famous "Whooooo mama" thread discussing everything about these chassis:
http://forum.arcadecontrols.com/index.php?topic=5448.0