Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: F|end on June 26, 2003, 10:20:12 am

Title: Sound speakers vs. Wells Gardner!
Post by: F|end on June 26, 2003, 10:20:12 am

 ;D

Haya folkys!


I was wondering here something! In a normal arcade cab, the speakers are set a few decimeters above the Wells, it can be pretty dangerous to the mon. health if the power of the speakers magnetism, reaches it! How can i avoid this?

[] thkx in adv.!

Title: Re:Sound speakers vs. Wells Gardner!
Post by: Apollo on June 26, 2003, 04:45:27 pm

Decimeters???

Shielded speakers.

Title: Re:Sound speakers vs. Wells Gardner!
Post by: BillyJack on June 27, 2003, 10:44:15 am

"The metric system is the tool of the devil!  My car gets forty rods to the hogshead and that's the way I likes it."


-Abe Simpson

Title: Re:Sound speakers vs. Wells Gardner!
Post by: AlanS17 on June 27, 2003, 10:52:39 am

You probably won't have alot to worry about. Any speakers that come in the machine *should* be magnetically shielded. Any computer speakers you buy are also magnetically shielded. Unless you start throwing in your own car audio system or something you should be fine.

Just amke sure you use magentically shielded speakers. Also keep in mind the the shielding on a $5 pair of speakers may not be very good. Also keep in mind that sometimes the back 2 speakers on a surround sound system may not be shielded even if the front 2 are.

Title: Re:Sound speakers vs. Wells Gardner!
Post by: PkingRoch on July 02, 2003, 03:42:08 pm

So, how do you protect if you suspect your speakers aren't sheilded?

Title: Re:Sound speakers vs. Wells Gardner!
Post by: ZippySLC on July 02, 2003, 11:06:24 pm

Quote from: PkingRoch on July 02, 2003, 03:42:08 pm

So, how do you protect if you suspect your speakers aren't sheilded?

use different speakers :)