Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: desistyle3 on June 25, 2003, 10:43:55 pm

Title: p360 psx hack question....!
Post by: desistyle3 on June 25, 2003, 10:43:55 pm

does anyoen know where to solder the 5V for the p360 on the madcatz psx PCB?  Its the one with no analogs and the handle grips are long.  Some people tell me its a madcatz 2001 or 2002?

thanks!

Title: Re:p360 psx hack question....!
Post by: desistyle3 on June 26, 2003, 11:35:29 am

bump..

Title: Re:p360 psx hack question....!
Post by: rampy on June 26, 2003, 11:49:55 am

Quote from: desistyle3 on June 26, 2003, 11:35:29 am

bump..

You should use a multimeter.  Or I'd highly recommend using an additional/different power source as sometimes the drain can be too much and cause intermittent issues (hypothetically)

Even if you use a wall wart ac->DC adpater make sure it's putting a true 5volts under load... again... with a multimeter =P

Sorry can't be much more help than that.

good luck!

Rampy