Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Lecithin on February 13, 2009, 08:29:31 pm

Title: Gauntlet Legends 25" dimensions
Post by: Lecithin on February 13, 2009, 08:29:31 pm

I recently found a 25" monitor inch (the smaller of the two) version of gauntlet legends for sale from someone within an hour of me. My question is this, does anyone have the dimensions for the machine without the CP on? I'm looking for height, width, and depth to see if I can fit it through the door I'm intending to take it through (and whether it will fit in my vehicle).

I'm hoping with the CP off it will fit but I can't seem to find dimensions. My vehicle can do approx 8'x4'x3' and the door is 34"

This link is not the same machine I'm talking about (its just a pic from the net) but it is the same model. This is the one I'm looking for the dimensions for.
http://images.marketworks.com/hi/52/51971/10120733.jpg

Any help is greatly appreciated (I want to call the guy back tomorrow)

If I can't find the dims I'll have him measure it, I would have had him already but he had to go to a benefit dinner. Anywho, thanks again!

Title: Re: Gauntlet Legends 25" dimensions
Post by: u_rebelscum on February 17, 2009, 01:51:36 pm

Atari called this model the 27" model (vs the 39" showcase model).

As for total guess, I'm going to say it was 25.5" wide.  The O&M manual lists a 24" part, and I'm guessing the sides are 3/4" particle wood.  Hopefully someone with more info can help.

Title: Re: Gauntlet Legends 25" dimensions
Post by: BASS! on February 18, 2009, 04:46:22 am

This whole machine is 3/4 plywood with black heavy duty laminate.  I was able to fit mine in the back of a toyota 4runner with the seats down.If I still had mine I'd measure it for ya.

Title: Re: Gauntlet Legends 25" dimensions
Post by: Popcorrin on February 18, 2009, 09:52:48 am

I think Atari had the 25", 27", and the 39" models.   If I am not mistaken the the 25" and 27" models were identical except for the size of the monitor.  Then again I could be wrong.

Title: Re: Gauntlet Legends 25" dimensions
Post by: bleargh on February 18, 2009, 02:57:34 pm

Quote from: Lecithin on February 13, 2009, 08:29:31 pm

I'm hoping with the CP off it will fit but I can't seem to find dimensions. My vehicle can do approx 8'x4'x3' and the door is 34"

This link is not the same machine I'm talking about (its just a pic from the net) but it is the same model. This is the one I'm looking for the dimensions for.
http://images.marketworks.com/hi/52/51971/10120733.jpg

I've got one of those cabinets here, with a 27" screen.

With the CP removed, and the marquee tilted back, it measures (rounded up to the nearest inch)... 27"W x 40"D x 73"H.

Title: Re: Gauntlet Legends 25" dimensions
Post by: Lecithin on February 19, 2009, 08:27:22 pm

Thanks the dimensions were very helpful.

On another note, it fit! I now own another cabinet :)