Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Level42 on February 11, 2009, 05:11:57 pm

Title: Hantarex 900, does it need an iso ?
Post by: Level42 on February 11, 2009, 05:11:57 pm

Does anybody know this ?

Title: Re: Hantarex 900, does it need an iso ?
Post by: Ken Layton on February 11, 2009, 05:15:57 pm

Yes!

Title: Re: Hantarex 900, does it need an iso ?
Post by: Level42 on February 11, 2009, 05:33:53 pm

Okidoki ! Thanks !

Title: Re: Hantarex 900, does it need an iso ?
Post by: SirPeale on February 12, 2009, 07:19:56 am

Couple good rules of thumb:

1) when in doubt, isolate.  It won't hurt the monitor if it doesn't need one.

2) check the chassis.  You may see a transformer on it.  That's a good indication that it doesn't need one.

3) older chassis (esp something as ancient as a 900) almost always need an iso.

Title: Re: Hantarex 900, does it need an iso ?
Post by: Level42 on February 12, 2009, 10:14:03 am

Yeah I kind of expected it but wanted to know for sure.

I will be working on 4 of these pretty soon. 1 is in the Joust, I bought 2 "spares" recently and 1 is in the weird Konami GT cockpit....