Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: robotype on February 10, 2009, 05:37:25 pm

Title: selti SL/760012500 replacement chassis
Post by: robotype on February 10, 2009, 05:37:25 pm

hello anybody knows if I can replace this chassis with a POLO28 or something else?

(http://img401.imageshack.us/img401/1348/1011263lj6.jpg) (http://imageshack.us)
(http://img401.imageshack.us/img401/1011263lj6.jpg/1/w3072.png) (http://g.imageshack.us/img401/1011263lj6.jpg/1/)

Title: Re: selti SL/760012500 replacement chassis
Post by: robotype on February 11, 2009, 10:51:52 am

near the yoke it says

KF 28
6 B
2L7B
3420

Title: Re: selti SL/760012500 replacement chassis
Post by: Ken Layton on February 11, 2009, 12:43:03 pm

I've never heard of nor seen that brand before.

Title: Re: selti SL/760012500 replacement chassis
Post by: robotype on February 11, 2009, 12:48:09 pm

me neither...
this chassis is faulty so I would need a substitute,
I was thinking POLO28 but how can I know if the impedence is the same? should I read something on the tube?

Title: Re: selti SL/760012500 replacement chassis
Post by: Ken Layton on February 11, 2009, 05:09:55 pm

Impedance pertains to the yoke on the tube, not the tube itself. Some yokes are "bonded" (glued to the tube) and are not intended to be removed.

Title: Re: selti SL/760012500 replacement chassis
Post by: robotype on February 12, 2009, 04:42:52 am

yes I did that before, but then I am not able to align the colors perfectly on big tubes like this. also, if I find a new 28" chassis it won't have the yoke so Imust use  the one already on the tube. thanks anyway for the reply!