Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: blkdog7 on January 20, 2009, 01:45:24 pm

Title: Have 60 in 1 with LL/JAMMA adapter in Ms. Pac. Would MAME upgrade be simple?
Post by: blkdog7 on January 20, 2009, 01:45:24 pm

Hey guys!

I currently have a 60 in 1 board plugged into my Ms. Pac-Man using the Lizard Lick adapter. Installation was painless and easy. Works great and I love it.

However, I wish it had some more vertical classics.

How hard would it be for me to unplug the 60 in 1 and plug-in a J-Pac into the Lizard Lick adapter and run MAME?

This is probably a very broad question. But, assuming I got the front end all working great on my computer and had all the classic vertical games also installed could I easily just take that system and plug it into my Lizard Lick adapter with a J-Pac and that's it??

Any insight or direction would be appreciated.

Title: Re: Have 60 in 1 with LL/JAMMA adapter in Ms. Pac. Would MAME upgrade be simple?
Post by: youki on January 20, 2009, 02:37:01 pm

I think the 60 in 1 is in Jamma format.  (i have a couple of 48 in 1 , i think it is the same manufacturer)

here one of my 48 in 1

(http://www.atomicfe.com/archeogamers/site/hardware/48in1/IMG_1578.JPG)

So i guess your Lizard Lick adapter is just a Jamma convertor for MS Pacman , so on one side you have a JAMMA connector , and you would have just to plug your J-PAC here.

Put a PC ,  an arcadeVGA (or soft15khz) and a front end .

(http://www.atomicfe.com/archeogamers/site/hardware/avgaconnect.jpg)

If you can read french i wrote a tutorial for beginer here :

http://www.atomicfe.com/forums/index.php?topic=188.0

Title: Re: Have 60 in 1 with LL/JAMMA adapter in Ms. Pac. Would MAME upgrade be simple?
Post by: blkdog7 on January 20, 2009, 03:48:27 pm

Thank you for that! It explains a lot.