Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: rlemmon on January 18, 2009, 12:51:39 pm
-
Hi guys, Could some one tell me what this angle iron looking thing is separating the bezel and control panel. I need one but i don't know what to call it to search. Thanks bros.
(http://i42.tinypic.com/ri7nex.jpg)
-
HOLY COW what a rare game. I've never even heard of that one.
http://www.klov.com/game_detail.php?game_id=7754
I guess that part would be called a glass retainer.
-
I recently needed a piece like that. I went to the hardware store and got a door sweep that is supposed to go on the bottom of the door to keep out drafts. I had to cut it to the needed length and drill the hole in the right spot but it works and it looks OK after a coat of paint. You can find aluminum angle iron at hardware stores and such. I needed a piece sort of like a T not an L. That is why the door draft stopper worked for mine.
Looked something like this.
http://hardware.hardwarestore.com/73-456-door-sweeps/door-sweep-617535.aspx (http://hardware.hardwarestore.com/73-456-door-sweeps/door-sweep-617535.aspx)
Stan
-
Thanks guys ! Stan thats a great idea did you just drill it onto your control panel ?
-
The mounting holes were in the CP already. I drilled hole that would line up with the holes that were in the CP. I also left the vinyl on to cover some small scratches that were in the area.
Stan
-
You should take a nice pic of it and contribute it to KLOV. The picture they have there stinks.